SLITTING RAZOR BLADES
for FILMS, ADHESIVE TAPES and else
C.B.G. ACCIAI Slitting Razor Blades are manufactured with the best Swedish steel.
The absolute cleanness of the chemical composition and the homogeneity of the structure guarantee the lack of non-metallic inclusions (that could cause micro-cracks along the shaving edge) and uniform wear of the edge.
The hardening and tempering procedure leads to a higher hardness that makes the steel become extremely resistant to the friction wear.
C.B.G. ACCIAI razor blades are available in stainless steel as standard specification and some items in high carbon steel too. Stainless steel prevents from oxidation and corrosion when blades are in contact with solvents, other aggressive chemicals or when used in very wet environments.
TECHNOLOGY & QUALITY
The peculiar characteristic of C.B.G. ACCIAI Slitting Razor Blades is the “variable angle” slitting edge. The technology consists in a double or triple edge sharpening with decreasing inclinations which results in a slitting edge with variable angle.
This advanced technique allows to drastically diminish the friction between blades and slit material, first reducing the mutual overheating (avoiding micro-weldings and/or burnings) and secondly the wear of the razor blade’s slitting edge.
The sharp edges of C.B.G. ACCIAI Slitting Razor Blades are all coated using sophisticated technologies to improve blade life. The extreme hardness of the materials used for coating, its high adesivity to the steel and the low friction factor dramatically improve the blade life by reducing the wear of slitting edges.
The coating protects the blade by wear whatever is the material to slit.
Aside the standard coating grade other coatings are available on request for specific needs.