WING LAMELLA®
Special pre-honed doctor blades
- EXTREMELY HIGH printing definition (tiny letters, pictures, drawings…)
- LONGER lamella life
- SLOWER & MORE UNIFORM blade wear
- REDUCED lamella bending: real working angle equal to nominal
- ELIMINATION of steel burrs & slivers (flexo)
- BETTER chamber sealing with consequent less ink spilling and waste (flexo) LESS oscillation-bound cracks (gravure)
- QUICK run-in time thanks to rounded tip Mirror Edge®
| Blade profile | Width (mm) | Thickness (mm) | Profile Specs - Range | Profile Specs - Standard |
WING | from 8 to 90 | 0,102 0,152 0,203 0,254 0,305 0,381 | Lamella 1,0 min - 4,0 max mm x from 0,04 mm | Thickness 0,152 mm: 2,47 x 0,065 mm Thickness 0,203 mm: 2,86 x 0,095 mm Thickness 0,254 mm: 3,20 x 0,125 mm |
SC – LAMELLA
Standard pre-honed doctor blade
- EXCELLENT printing definition under all conditions
- FULLY SATISFACTORY ratio lasting-quality
- QUICK run-in time thanks to rounded tip Mirror Edge®
| Blade profile | Width (mm) | Thickness (mm) | Profile Specs - Range | Profile Specs - Standard |
SC | from 8 to 90 | 0,102 0,152 0,203 0,254 0,305 0,381 | Lamella 0,5 min - 2,5 max mm x from 0,04 mm | Thickness 0,152 mm: 1,3 x 0,068 mm Thickness 0,203 mm: 1,3 x 0,100 mm Thickness 0,254 mm: 1,3 x 0,130 mm |
TMC – BEVEL
Straight bevel pre-honed doctor blade
- IDEAL blade for high pressure working conditions (minimal blade deformation)
- PERFECT for short jobs
- QUICKEST run-in time thanks to very thin rounded tip Mirror Edge®
| Blade profile | Width (mm) | Thickness (mm) | Profile Specs - Range | Profile Specs - Standard |
TMC | from 8 to 90 | 0,102 0,152 0,203 0,254 0,305 0,381 | Bevel from 2° to 60° | 4° & 15° |
N – ROUND EDGE
Rounded edges doctor blade
- HIGHEST blade rigidity
- LONG lasting
- Slow run-in time (depending on thickness) Medium printing definition
- SUGGESTED for full tones & anilox with few lines/cm
| Blade profile | Width (mm) | Thickness (mm) | Profile Specs - Range | Profile Specs - Standard |
N | from 8 to 90 | 0,065 0,076 0,102 0,152 0,203 0,254 | Round | radius = ½ thickness |
MIRROR SURFACE
REVOLUTION IN FINISHING
